Home Contact Us Dealers Bookmark Us  
 
Apollo Furniture
Arcaydis
Audio Art cables
Edwards Audio
Inspire
Jasmine Audio
Liberty Acoustics
Merlin Cables
Revolver
Saxon
Talk Electronics
Tound

 
 

Saxon A300 Integrated Amplifier


Hand-built using a 1.2mm steel chassis and using a 6mm extruded military-grade HE9 aluminium front panels, the Saxon A300 has many of it's bigger brothers' attributes. The use of ultra-short signal-paths and the elimination of the need for conventional wiring has allowed us to produce what is probably the finest £400/$750 integrated amplifier available.

By raiding the parts bins from our various different historic and current models, from both Talk and Saxon, we have been able to produce this stunning amplifier. The power amp section is directly 'stolen' from the A500 and it's mother board is passed down from our older Talk Cyclone 1.1. The Transformer and capacitors are the same as we used in our Talk Storm 1, our original integrated amplifier but with the more recent pre-amp section of the Cyclone 1.1. The cost savings that this process yields means that we are able to produce an exceptional performance for the money.

Producing a healthy 50 Watts into 8 Ohms and over 80 Watts into more difficult 4 Ohm loads, the A300 demonstrates an impressive ability to drive all real world loudspeakers. Standard 4mm binding posts are provided for the speaker outputs.

The amplifier is fully equipped with RC5 based remote control for input selection, volume and mute functions, however to keep costs down is supplied without a handset. Although one can be provided if you find it necessary. The matching CD300's handset will operate both items. It has 6 line-level inputs with one pre-out socket for additional power amplifiers such as the Saxon P500.

Price: $1,249.95 USD


Saxon A500 Integrated Amplifier

By borrowing the same 1.2mm chassis as the A700 and benefiting from 6mm extruded military-grade HE9 aluminium front panel, the Saxon A500 is a very elegant and highly respected performer. It uses the same PCB as it's bigger brother but with a slightly smaller power supply and as a result a slightly lower output - 70 Watts into 8 ohms. The use of ultra-short signal-paths and the elimination of the need for conventional wiring has resulted in an exceptional price/performance ratio.

The power amp section in this integrated amplifier sets new standards at it's modest price, a level of dynamism and resolution previously unheard of in competing products. The increased resolution of transients, coupled with finely etched detail allows a stunning level of realism and scale.

Producing a healthy 75 Watts into 8 Ohms and over 125 Watts into more difficult 4 Ohm loads, the A500 demonstrates an impressive ability to drive even the most demanding of loudspeakers. As with all Saxon amplifiers, dynamics are a given - what may be surprising is the high-level of subtlety and deftness that also abounds from this muscular amplifier. Vocals in particular are projected with a sense of space and solidity that allows all the musical nuances to be felt and experienced, not just heard, this is a truly musical amplifier.

Standard 4mm gold plated binding posts are provided for the speaker outputs. The amplifier is fully equipped with remote control for input selection, volume and mute functions and has 6 line-level inputs with one pre-out socket for additional power amplifiers such as the Saxon P500 or 700.

Price: $1,679.95 USD

 

 

Saxon A700 MK2 Integrated Amplifier

Based on a fully complimentary Bi-polar output devices
and SMT technology the A700 Mk2 has 100W output into 8 Ohms and 200W into 4 Ohms. It has dual mono
topology right through to the power supply, so unusually for an integrated, especially at this price level, there are two
transformers, one for each channel. This amplifier has awesome control over any speakers and sounds effortlessly
open in character.
The pre-amp has micro controlled input switching via the use of relays, specially selected op-amps from Burr-Brown
and a dedicated pre-amp output is available for bi-amping or future upgrades..
Great attention has been made to ensure that the styling and build are up to the usual Talk Electronics standards. Hi-
Fi today must look good as well as sound good
'listen and believe' ........
Saxon

Hand-built using a 1.2mm steel chassis and benefiting from 10mm extruded military-grade HE9 aluminium front panels, the Saxon A700 is a very elegant piece of design. The use of ultra-short signal-paths and the elimination of the need for conventional wiring has resulted in an exceptional price/performance ratio.

Uniquely designed with a dual mono power amp section this integrated amplifier sets new standards at it's modest price, a level of dynamism and resolution previously unheard of in competing products. The increased resolution of transients, coupled with finely etched detail allows a stunning level of realism and scale.

The A700 Mk2 uses bi-polar Darlington output devices driven with an all-new front-end circuit derived from the more advanced Talk MOSFET designs. Extensive use of surface-mount technology and micro-processor controlled Relay input-switching eliminates the need for conventional wiring within the amplifier and maximises the signal-to-noise ratio.

Producing a healthy 100 Watts into 8 Ohms and over 180 Watts into more difficult 4 Ohm loads, the A700 Mk2 demonstrates an impressive ability to drive even the most demanding of loudspeakers. As with all Saxon amplifiers, dynamics are a given - what may be surprising is the high-level of subtlety and deftness that also abounds from this muscular amplifier. Vocals in particular are projected with a sense of space and solidity that allows all the musical nuances to be felt and experienced, not just heard.

Standard 5 way, 4mm gold plated binding posts are provided for the speaker outputs. The amplifier is fully equipped with remote control for input selection, volume and mute functions and has 6 line-level inputs with one pre-out socket for additional power amplifiers such as the Saxon P700.

When partnered with the matching CD700 Mk2 CD Player a truly musical toe-tapping hi-fi system is created

Price: $1,999.95 USD


Saxon CD300 CD Player 24/192 Upsampling

Based upon the top of the range CD700 this is a 'top down' design using many of the main elements that make that player so good. Built around the same L1210 Philips mechanism this player compromises only in the power supply which although based on a single transformer still has separate windings for the various digital and analogue functions. In order to reduce costs we have omitted the balanced outputs whilst cosmetically the front panel has been reduced in thickness to 6mm.

As a result of this 'top down' philosophy we can use the same digital processing including the twin differential DAC's. unique at this price point. The analogue output topology is the same offering not only a similar performance but with the added bonus of an upgrade path for your future.

The extensive use of high-quality surface mount components and gold plated PCB's throughout the range, is a testament to the care and dedication that has gone into creating this CD player.

The result is a highly musical CD player which is nothing short of amazing value for money. When compared with other more clinical and artificial-sounding alternatives the improvement gained is a welcome 'breath of fresh air'. If partnered with the matching A300Si amplifier a system of incredible performance is created. 'listen and believe' ........

Price: $1,249.95 USD

 

 

Saxon CD500 CD Player 24/192 Upsampling


Based upon the top of the range CD700 this is a 'top down' design using many of the main elements that make that player so good. Built around the same L1210 Philips mechanism this player compromises only in the power supply which although based on a single transformer still has separate windings for the various digital and analogue functions. In order to reduce costs we have omitted the balanced outputs whilst cosmetically the front panel has been reduced in thickness to 6mm.

As a result of this 'top down' philosophy we can use the same digital processing and analogue output PCB offering not only a similar performance but with the added bonus of an upgrade path for your future.

The extensive use of high-quality surface mount components throughout the range, is a testament to the care and dedication that has gone into creating this CD player.

The result is a highly musical CD player which is nothing short of amazing value for money. When compared with other more clinical and artificial-sounding alternatives the improvement gained is a welcome 'breath of fresh air'. If partnered with the matching A500 integrated amplifier a system of incredible performance is created. 'listen and believe' ........

Price: $1,799.95 USD


Saxon CD700 Mk 2 CD Player

Built around the latest L1210 Philips mechanism this, the top of the range Saxon CD player will not disappoint, with stunning sound quality and fully balanced differential outputs this player is a cut above what you would normally expect at this price level.

Great lengths have been taken to optimise the printed circuit board layout to gain the maximum performance from the two, dual differential digital to analogue converters (DACs) which are followed by our own custom analogue output circuitry, minimising phase shift whilst giving excellent attenuation of radio frequency interference inherently generated by digital circuitry. This new design also has two separate transformers, one for digital and one for the analogue section.

The extensive use of high-quality surface mount components throughout the range, is a testament to the care and dedication that has gone into creating this CD player.

The result is a highly musical CD player, totally at odds with the typically clinical and artificial-sounding alternatives currently available. When partnered with the matching A700 Mk2 integrated amplifier a system of incredible performance is created, resulting in unbridled toe-tapping and air-guitaring!

Price: $1,999.95 USD

 

 

 

Saxon C700 Preamplifier 6 Channel

The all new Saxon C700 is probably the most flexible 6 channel remote controllable Pre-amp currently available. With it's unique user selectable, high or low gain, a six channel AV/MCA input and output facility with built in master control over all six channels simultaneously, plus a fully balanced CD input and main Left and Right outputs. This is a remarkable product.

It has a 10mm machined aluminium front panel made from military grade material and a fully turned, one piece volume control for a quality feel. With it's elegant yet robust feel it is at home as the heart of any 2 channel system or as the main controller for an AV system.

With the matching P700 power amplifier the two channel performance attainable from this combination is unbeatable at this price.

Price: $1,799.95 USD

 

Saxon P700/2 Stereo Power Amplifier

The Saxon P700 is a bi-polar 100Watt Stereo Power amplifier. Based on a custom made 300VA transformer with separate windings for each channel. It uses circuit topology 'borrowed' from it's bigger brother, the Talk Electronics Tornado 2.2 power amplifier.

It has user switchable balanced and un-balanced inputs and standard gold plated 4mm binding posts. Only one set of binding posts are available per channel as when bi-wiring the correct amplifier termination is for two plugs only, otherwise you lose half the benefit as the ground point is no longer common.

The performance offered is without compromise for the price, as with all Saxon products the price/performance ratio is the driving force during the design stages. The emphasis is on clean dynamics and natural instrument timbre, all painted in a clearly defined space.

Price: $2,099.95 USD

 

Saxon SI 100 8 Foot Terminated

Price: $149.95 USD


Saxon SI 300 RCA Interconnect

Price: $149.95 USD

 
 
Back to Top
   
Copyright © 2007
British Hifi Audio Distribution Ltd.
All Rights Reserved