Liberty Acoustics LA-38

This suberbly crafted loudspeaker looks as good as it sounds. 11 coats of laquer are applied and hand sanded in between each coat for a perfect finish. This speaker exhibits qualities that far
surpass its price Range. An audition is well worth it. It portrays The wonderfull sense of being there. Jazz and horns especially sound true, With Bass thats fast and not overpowering.

Winner of the Stereo Mojo Award!

Cabinet

Thickness of MDF used for the enclosure: 332.7mm
damping materials in the enclosures: composite materials of synthetic fibres , foam,
PE bubble sheet for ultimate sound performance
Braces 4 pieces

Crossover

2.5 way crossover at 1100Hz and 2200Hz

Internal wiring used (not any silver wires used): for tweeter custom made OCC1.5
for woofer custom made OCC2.5

Capacitors used for woofer: custom made electrolytic capacitors
Capacitiors used for tweeter: Gerrman M-Cap Supreme is speficially used at 4.7?gF;
Other types of caps used are custom made 2.2?gF and 3.3?gF

Drivers

Custom Twin ribbon Super Tweeter
Mid/bass drivers Morel 168/8

Frequency Responce: 35-58,000 HZ +/- 3DB
Normal Power Handling: 220W
Sensitivity: 90dB
Impedance: 4 ohm

Dimensions & Weight

Net weight: 31kg/pc
Actual Speaker Dimensions

Gross weight: 41kg/pc
Dimension of carton box: 54cmx45cmx129cm

Finishes: light Burl, Piano Black, Rosewood

Price $4500.00 USD

Liberty Acoustics LA10-180

The 10 inch 180 watt subwoofer offers dynamic bass for smaller rooms. The base is not just for
looks, but to stop absorbtion of soundwaves into a carpeted floor

Specifications:

Amplifier Output:               180 Watts into 4Ω load continuous
Frequency Response:          35 HZ to 120HZ
Speaker Impedence:           4 OHMS
Sensitivity                           89db
Base Driver:                        10" Metal chassis with reinforced Paper Cone
Filter compensation circuit:  Multi-element, high and low-pass filters with adjustable phase
and active gain control
Cabinet:                                 20mm MDF carcass in a very rigid enclosure for LA-SUB10
Finish:                                    Black Piano finish
Dimensions                           H x W x D mm 372 x 342 x 450
Weight                                   24Kgs

Liberty Acoustics LA-12-500

The Cabinets are built from High Quality Machinable MDF, as this is easier to machine and easier
to spray, it also makes the cabinet more dense and less resonant. The LA12-500 will also have a
small amount of electronic Q adjustment to make it a 0.7 Q and this will also give rise to the -3dB
point being lower. The  -3dB point in the middle of a field is going to about 30Hz, which does not
sound too low on paper, but, you are not going to use it in a field. The very slow roll off matches
very well with boundary gain and will extend the bass well below 20Hz, so what you will end up
with is a subwoofer with very deep bass capable of high SPL,s  that will be Audiophile quality
but also cope extremely well with movies.

• 500W MOSFET Amplifier
• 5 Second Anti Thump Delay
• Thermal Protection
• ASP Automatic Speaker Protection
•  Short Circuit Protection
• 4mm Thick Aluminium Front Panel with integral heatsink
• Phase Shift Continuously variable 0 - 180Deg
• High and Low level inputs with separate gain control
• Balanced Input
• Upper roll off is continuously variable between 40Hz and 120Hz
• Phase Shift Continuously variable 0 - 180Deg

Liberty Acoustics Audio Racks

All Liberty Acoustic Racks and Speaker Stands are built to the highest standards by Apollo HiFi
Furniture in England. The Racks are custom Built to our Exact Specifications, so that they can be
used for audiophile systems and the have the additional benefit of being 20' between the poles,
so Home Theatre Receivers and larger power amps will fit Perfectlly. The sounds is clear and
unimpeded by vibration.

LA 600 Shelves $279.95 USD Each

Optional Black Glass $20.00 USD Each

The 44mm diameter spacers can be assembled easily to form a rigid shelving system,with a choice of
7 different heights between shelves: 93mm, 138mm, 183mm, 228mm, 273mm, 318mm and 363mm.
The shelves themselves are made from 12mm clear or piano black finished glass sandwiched between
the spacers with black contoured isolation washers. You are supplied with optional carpet piercing
spikes or adjustable glide feet or castors.

Available in Satin, Piano Black, Crackle Black And Champagne finishes

Liberty Acoustics Center Channel Stand

Finding a high Quality Centerchannel stand is hard these days The LA center Channel stand with its
5 colums holds up to 200lbs in weight An mathes the LA speaker stands. Custom Heights are
available by Special order.

LA 5C $279.95 USD

Liberty Acoustics Speaker Stands

The LA speaker stand is finished with Crackle Black Bases and Satin poles to stand out in the
crowd. They are 24' and 28' Tall Satin Black also available.

LA-3 24 inch $219.95 USD/PR

LA-3 28 inch $244.95 USD/PR